Polycom VSX Series Integrator's Reference Manual page 65

Command Syntax
chaircontrol • "hangup_term" "term_no":
(continued) Disconnects the specified terminal
from the conference.
• end_conf: Ends the conference.
• register: Registers to receive
feedback on all chair control
operations.
• unregister: Unregisters (stops
feedback on all chair control
operations). Use quotation marks
around compound names and
around strings that contain spaces.
For example: "united states" or "111
222 333".
dial dial <addressbook|manual>
dial addressbook <"name">
dial manual <"speed"> <"dialstr1">
["dialstr2"] [<h323|h320|ip|isdn>
Where:
• addressbook: Dials an address
book entry.
Requires the name of the entry.
• manual: Dials a video call number
dialstr1 at speed of type h323 or
h320 (the parameters ip and isdn
are deprecated). Requires the
parameters "speed" and "dialstr1".
• "name": The name of the Address
Book entry. The name may be up to
25 characters. Use quotation marks
around strings that contain spaces.
For example: "John Doe".
For dial manual parameter:
• "speed": Valid data rate for the
network.
• "dialstr1", "dialstr2": Valid ISDN
or IP directory number.
• h323, h320, ip, isdn: Type of call.
Note: The parameters ip and isdn are
deprecated.
dialchan-
dialchannels <set|get> <1..N>
nels
Where:
• set: Sets the number of channels to
dial.
• get: Returns the current setting.
• 1..N: is number of ISDN lines. N is 8
for QBRI, 23 and 30 for the PRI.
© Polycom, Inc.
Description
Lets you dial video or audio calls
either manually or from the
Directory.
Lets you define how many ISDN
channels are dialed in parallel.
User interface screen location:
System > Admin Settings >
Network > ISDN
Chapter 3 - System Commands
Example
dial manual 2x64
5551212 5551213
h320
dial addressbook
" "
Monday meeting
dialchannels set 8
3 - 25