Polycom VSX Series Integrator's Reference Manual page 75

Command Syntax
rs366dialing rs366dialing <on|off|get>
Where:
on:
• Enables RS-366 dialing.
off:
• Disables RS-366 dialing.
get:
• Returns the current setting (on
or off).
requireacct- requireacctnumtodial <yes|no|get>
numtodial
Where:
• yes: Enables the option.
• no: Disables the option.
• get: Returns the current setting (yes
or no).
roomphone- roomphonenumber <set|get>
["number"]
number
Where:
• set: Sets the room phone number
when followed by the "number"
parameter.
To erase the current setting, omit the
"number" parameter.
• get: Returns the current setting.
• "number": Telephone number for a
telephone (not the VSX system) in
the room. Use quotation marks
around the number if it contains
spaces. For example: "512 555
1212".
© Polycom, Inc.
Description
Sets or gets RS-366 dialing.
Enable this option if you want to
call from the system through the
DCE connection to the far-site
video conferencing system. Dis-
able this option if you are using
your DCE to dial the call or if you
have a dedicated connection to
the far site.
User interface screen location:
System > Admin Settings >
Network >
V.35/RS-449/RS-530: RS-366
Dialing.
Enables or disables the Require
Account Number to Dial option.
It is used to log calls to a specific
account so that they can be
tracked and billed to the appro-
priate departments. When this
option is selected, you cannot
make a call without first entering
an account number. This
account number is saved in the
GMS server database along
with information specific to the
call. Typically, the GMS adminis-
trator assigns the account
number.
User interface screen location:
System > Admin Settings >
Global Services > Account
Validation: Require Account
Number to Dial
Lets you enter the number of the
phone that is located in the
same room as the VSX system.
If the system is managed by the
Global Management System
(GMS) software, this number
will be provided to the GMS
administrator if the person using
the VSX system requests help.
User interface screen location:
System > Admin Settings >
General Settings > Location:
Room Telephone Number
Chapter 3 - System Commands
Example
rs366dialing on
requireacctnumtod
ial yes
roomphonenumber
"512 5551212"
3 - 35