Polycom VSX Series Integrator's Reference Manual page 123

Command Syntax
v35suffix v35suffix <set|get> <"valid speed">
["value"]
v35suffix set <"valid speed>
["value"]
v35suffix get <"valid speed">
Where:
• set: When followed by a "valid
speed" and a "value," sets the dialing
suffix when followed by a "value"
parameter. To erase the current
setting, omit the "value" parameter.
• get: Returns the current setting for
valid speed.
• "valid speed": Valid speeds: 56,
64, 2x56, 112, 2x64, 128, 168, 192,
224, 256, 280, 320, 336, 384, 392,
7x64, 504, 512, 560, 576, 616, 640,
672, 704, 728, 768, 784, 832, 840,
14x64, 952, 960, 1008, 1024, 1064,
1088, 1120, 1152, 1176, 1216,
1232, 1280, 1288, 21x64, 1400,
1408, 1456, 1472, 1512, 1536,
1568, 1600, 1624, 1664, 1680,
1728, 28x64, 1856, 1920, all.
The parameter "all" lists all the
available speeds and their
associated dialing prefixes.
• "value": The dialing suffix, which is
a function of your DCE. Consult the
DCE user guide for information.
© Polycom, Inc.
Description
Sets or gets the dialing suffix. It
assumes that a profile has
already been selected. See the
v35profile command on
page 3-82.
User interface screen location:
System > Admin Settings >
Network >
V.35/RS-449/RS-530 (page 2):
Suffix
Chapter 3 - System Commands
Example
v35suffix set 128
"#4#2"
This command
associates the dialing
suffix #4#2 to the speed
128.
3 - 83