Diagnostics And Statistics Commands - Polycom VSX Series Integrator's Reference Manual

Integrator's Reference Manual for the VSX Series

Diagnostics and Statistics Commands

Command Syntax
advnetstats advnetstats [{0..2}]
Where:
• 0..2: Calls in a multipoint call, where
0 is call #1, 1 is call #2, and 2 is call
#3. Select a number from this range
to specify a remote site call for which
you want to obtain advanced
network statistics.
Omit this parameter when retrieving
statistics for a point-to-point call
3 - 42
Description
Gets advanced network statis-
tics for a call.
User interface screen location:
System > Diagnostics > Call
Statistics
www.polycom.com/videodocumentation
Example
advnetstats 1
returns:
call:1 tar:24k
rar:24k tvr:64.3k
rvr:104k
tvru:63.8k
rvru:114.6k
tvfr:15.0
rvfr:15.0 vfe ---
tapl:66 rapl:0
taj:46mS raj:40mS
tvpl:122 rvpl:0
tvj:21mS rvj:60mS
dc:---
rsid:Polycom_4.2
Returned parameters
are:
tar Transmit audio
rate
rar Receive audio rate
tvr Transmit video
rate
rvr Receive video rate
tvru Transmit video
rate used
rvru Receive video rate
used
tvfr Transmit video
frame rate
rvfr Receive video
frame rate
vfe Video FEC errors
tapl Transmit audio
packet loss (H.323 calls
only)
tlsdp Transmit LSD
protocol (H.320 calls
only)