Polycom VSX Series Integrator's Reference Manual page 61

Command Syntax
alertvideo- alertvideotone
<1|2|3|4|5|6|7|8|9|10get>
tone
Where:
• 1, 2, 3, 4, 5, 6, 7, 8, 9, or 10: Sets the
incoming video alert to the
corresponding tone.
• get: Returns the current alert video
tone setting (1, 2, 3, 4, 5, 6, or 7).
allowmixed- allowmixedcalls <yes|no|get>
calls
Where:
• yes: Enables mixed IP and ISDN
calls.
• No: Disables mixed IP and ISDN
calls.
• get: Returns the current setting (yes
or no).
allow- allowstreaming <yes|no|get>
streaming
Where:
• yes: Allows streaming calls.
• no: Disallows streaming calls.
• get: Returns the current setting (yes
or no).
answer answer video
Where:
• video: Answers incoming video
calls when the Auto Answer Point to
Point or Auto Answer Multipoint
option is set to No.
© Polycom, Inc.
Description
Sets the tone used for incoming
video calls.
User interface screen location:
System > Admin Settings >
Audio: Incoming Video Call
Sets or gets the ability to place
and receive mixed protocol mul-
tipoint calls (IP and ISDN). It
allows the administrator to dis-
able this ability for security
reasons.
User interface screen location:
System > Admin Settings >
General Settings > System
Settings > Call Settings:
Allow Mixed IP and ISDN Calls
Note: This option is only visible
on screen if ISDN and IP have
both been enabled on the Call
Preference screen.
Adds Streaming to the Utilities
screen so that users can start
streaming calls.
User interface screen location:
System > Admin Settings >
Network > IP > Streaming:
Allow Streaming
Answers incoming video calls.
Chapter 3 - System Commands
Example
alertusertone 8
allowmixedcalls
yes
allowstreaming
yes
answer video
3 - 21