Polycom VSX Series Integrator's Reference Manual page 139

Command Syntax
marqueed- marqueedisplaytext <set|get>
isplaytext
Where:
• set: Sets the text to display in the
dialing entry field followed by the text
to use. Enclose the string in
quotation marks if it includes
spaces.
• get: Returns the current marquee
display text.
ntpmode ntpmode <auto|off|manual|get>
Where:
• auto: Automatically selects an NTP
server from the Internet.
• off: Turns off the use of an NTP
server.
• manual: Lets you specify a server
using the
page 3-99.
• get: Returns the current time server
mode.
ntpserver ntpserver <set|get> <"DNS name or
ipaddress">
Where:
• set: Sets the IP address of the NTP
server when followed by a valid
parameter.
• get: Gets the IP address of the NTP
server.
• "DNS name or ipaddress": The
DNS name or IP address of the NTP
server.
© Polycom, Inc.
ntpserver command on
Description
Specifies the text to display in
the dialing entry field on the
home screen.
User interface screen location:
System > Admin Settings >
General Settings > Home
Screen Settings: Enter Mar-
quee Text
Note: This option is only avail-
able when dialingdisplay is set
to display marquee.
Sets or gets the mode of the
system's Network Time Protocol
(NTP) server. NTP server time
is used to ensure synchronized
time data in the local Call Detail
Report.
User interface screen location:
System > Admin Settings >
Network > IP > H.323 Settings
> NTP Setup
Sets or gets an Network Time
Protocol (NTP) server, using the
IP address or the DNS name of
the server. This allows you to
use an internal time server and
thus synchronize the system's
time with the time on your
internal network. The system
uses this time only for the local
Call Detail Report.
User interface screen location:
System > Admin Settings >
Network > IP > H.323 Settings
> NTP Setup
Chapter 3 - System Commands
Example
marqueedisplay-
text "select an
entry from the
directory"
ntpmode auto
ntpserver set
time.xyzcorp.com
3 - 99