Table 4-11. Via Onchip Pci Device; Via Onchip Pci Device - Quanmax KEEX-2010 User Manual

OnChip IDE Channel0
Options - Enabled, Disabled.
IDE Prefetch Mode
Options - Enabled, Disabled.
Primary Master/Slave Drive PIO Mode
The four IDE PIO (Programmed Input/Output) fields let you set a PIO mode (0-4) for each of the two IDE
devices that the onboard IDE interface supports. Modes 0 through 4 provide successively increased
performance. In Auto mode, the system automatically determines the best mode for each device.
Options - Auto, Mode 0, Mode 1, Mode 2, Mode 3 and Mode 4
Primary Master/Slave UDMA
Ultra DMA/33 implementation is possible only if your IDE hard drive supports it and the operating
environment includes a DMA driver (Windows 95 OSR2 or a third-party IDE bus master driver). If your
hard drive and your system software both support Ultra DMA/33, select "Auto" to enable BIOS support.
Options - Auto, Disabled
IDE HDD Block Mode
Block mode is also called block transfer, multiple commands, or multiple sector read/write. If your IDE hard
drive supports block mode (most new drives do), select Enabled for automatic detection of the optimal
number of block read/writes per sector the drive can support.
Options - Enabled, Disabled

VIA OnChip PCI Device

Press Enter to select VIA OnChip PCI Device.
Azalia HD Audio Controller
Options - Auto, Disabled.
4-16 KEEX-2010 Series User Guide
Azalia HDA Controller
Giga LAN Controller
↑↓→←Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-safe defaults

Table 4-11. VIA OnChip PCI Device

VIA OnChip PCI Device
[Auto]
[Enabled] __________________________
Menu Level
F7: Optimized Defaults
Item Help