Standard / extended temperature
industrial motherboard in mini-itx form factor with intel haswell processors and hm87 / qm87 express chipset (63 pages)
Standard / extended temperature industrial-grade
motherboard in atx form factor with intel sky lake /
kaby lake s-series processors (69 pages)
Summary of Contents for Quanmax MITX-DNV0 Series
Page 1
USER GUIDE MITX-DNV0 Series Doc. User Guide, Rev. 1.2 Doc. ID: [To be Determined] www.quanmax.com // 1...
Page 2
MITX-DNV0 Series - User Guide, Rev. 1.2 This page has been intentionally left blank www.quanmax.com // 2...
Page 3
MITX-DNV0 SERIES - USER GUIDE Disclaimer The information in this user’s guide is provided for reference only. Quanmax does not assume any liability arising out of the application or use of the information or products described herein. This user’s guide may contain or reference information and products protected by copyrights or patents and does not convey any license under the patent rights of Quanmax, nor the rights of others.
Page 4
ENVIRONMENTAL DAMAGE (COLLECTIVELY, "HIGH RISK APPLICATIONS"). You understand and agree that your use of Quanmax devices as a component in High Risk Applications is entirely at your risk. To minimize the risks associated with your products and applications, you should provide adequate design and operating safeguards.
Page 5
If you have any difficulties using this user guide, discover an error, or just want to provide some feedback, contact Quanmax technical support. Detail any errors you find. We will correct the errors or problems as soon as possible and post the revised user guide on our website.
MITX-DNV0 Series - User Guide, Rev. 1.2 Symbols The following symbols may be used in this user guide DANGER indicates a hazardous situation which, if not avoided, will result in death or serious injury. WARNING indicates a hazardous situation which, if not avoided, could result in death or serious injury.
Therefore, in the interest of your own safety and of the correct operation of your new Quanmax product, you are requested to conform with the following guidelines.
General Instructions on Usage In order to maintain Quanmax’s product warranty, this product must not be altered or modified in any way. Changes or modifications to the product, that are not explicitly approved by Quanmax and described in this user guide or received from Quanmax Support as a special handling instruction, will void your warranty.
MITX-DNV0 Series - User Guide, Rev. 1.2 Table of Contents Symbols ..........................................6 For Your Safety ........................................7 High Voltage Safety Instructions .................................. 7 Special Handling and Unpacking Instruction ............................7 Lithium Battery Precautions ..................................8 General Instructions on Usage ..................................8 Quality and Environmental Management ..............................
Table 50: Main Setup Menu Sub-Screens and Functions ........................58 Table 51: List of Acronyms .................................... 83 List of Figures Figure 1: System Block Diagram MITX-DNV0 Series ..........................17 Figure 2: Top Side ......................................22 Figure 3: Connector Panel Side ................................... 24 Figure 4: VGA Connector CN24 ..................................
Page 12
MITX-DNV0 Series - User Guide, Rev. 1.2 Figure 26: Programming example 1 ................................52 Figure 27: Programming example 2 ................................52 Figure 28: Jumper Connector ..................................53 Figure 29: mPCIe / mSATA Selection JP1 ..............................53 Figure 30: USB Power Selection JP2 ................................53 Figure 31: AT / ATX Power Mode Selection JP3 .............................
MITX-DNV0 Series - User Guide, Rev. 1.2 1/ Introduction This user guide describe the MITX-DNV0 Series board made by Quanmax. This board will also be denoted MITX-DNV0 Series within this user guide. Use of this user guide implies a basic knowledge of PC-AT hardware and software. This user guide focuses on describing the MITX-DNV0 Series board's special features and is not intended to be a standard PC-AT textbook.
Handle the board only by the edges To get the board running follow these steps. If the board shipped from Quanmax already has components like RAM and CPU cooler mounted, then skip the relevant steps below. Turn off the PSU (Power Supply Unit) Turn off PSU (Power Supply Unit) completely (no mains power connected to the PSU) or leave the Power Connectors unconnected while configuring the board.
> 7 mm. Do not use washers with teeth, as they can damage the PCB and cause short circuits. 2.2. Chassis Safety Standards Before installing the MITX-DNV0 Series in the chassis, users must evaluate the end product to ensure compliance with the requirements of the IEC60950-1 safety standard: ...
Page 16
MITX-DNV0 Series - User Guide, Rev. 1.2 Vaihda paristo ainoastaan lalteval- mistajan suosittelemaan tyyppiln Hävitä käytetty paristo valmistajan ohjeiden mukaisesti www.quanmax.com // 16...
MITX-DNV0 Series - User Guide, Rev. 1.2 3/ System Specifications 3.1. System Block Diagram Figure 1: System Block Diagram MITX-DNV0 Series www.quanmax.com // 17...
MITX-DNV0 Series - User Guide, Rev. 1.2 3.2. Component Main Data The table below summarizes the features of the MITX-DNV0 Series motherboard. Table 1: Component Main Data System Processor Intel® Denverton SoC Processors, Atom™ C3000 Series Memory Up to 2x DDR4 UDIMM memory socket...
The MITX-DNV0 Series is designed to support Intel® Denverton Processors, Atom™ C3000 Series. The BGA CPU is remounted from factory. Quanmax has defined the board versions as listed in the following table, so far all based on Embedded CPUs. Other versions are expected at a later date.
Memory modules have in general a much lower longevity than embedded motherboards, and therefore EOL of modules can be expected several times during lifetime of the motherboard. As a minimum it is recommend using Quanmax memory modules for prototype system(s) in order to prove stability of the system and as for reference.
MITX-DNV0 Series - User Guide, Rev. 1.2 Table 6: Display Configuration Display Max. Resolution (Px) at 60 Hz 1024 x 768 3.8. Power Supply In order to ensure safe operation of the board, the input power supply must monitor the supply voltage and shut down if the supply is out of range –...
MITX-DNV0 Series - User Guide, Rev. 1.2 4/ Connector Locations 4.1. Top Side Figure 2: Top Side 11 12 13 14 15 16 Table 8: Jumper List Item Designation Description See Chapter mPCIE / mSATA Selection for MPCIE1 7.16.1 USB Power Selection 7.16.2...
Page 23
MITX-DNV0 Series - User Guide, Rev. 1.2 Item Designation Description See Chapter FAN2 System FAN Wafer SATA1 SATA Port-1 Connector SATA2 SATA Port-2 Connector SATA3 SATA Port-3 Connector SATA4 SATA Port-4 Connector SATA5 SATA Port-5 Connector SATA6 SATA Port-6 Connector CN17 USB2.0 Port-1, 2 Header...
MITX-DNV0 Series - User Guide, Rev. 1.2 5/ Connector Definitions The following defined terms are used within this user guide to give more information concerning the pin assignment and to describe the connector's signals. Defined Term Description Shows the pin numbers in the connector...
MITX-DNV0 Series - User Guide, Rev. 1.2 6.2. Ethernet Connectors (CN18, CN19 & CN20) The MITX-DNV0 Series supports six channels of 10/100/1000 Mbit Ethernet, which are based Intel® I210-AT (LAN1 & LAN2 (CN18)) and Marvell® 88E1543 (LAN3 & LAN4 (CN19), LAN5 & LAN6 (CN20)) controllers respectively.
MITX-DNV0 Series - User Guide, Rev. 1.2 Table 14: Signal Description Signal Description USBn_TX+, USBn_TX-, Differential pair works as serial differential receive/transmit data lines. USBn_RX+, USBn_RX-, (n= A, B) USBn_D-, USBn_D- +USBn_VCC 5 V supply for external devices. VCC is supplied during power-down to allow wakeup on USB device activity.
7/ Internal Connectors 7.1. Power Input Wafer (ATX1) The MITX-DNV0 Series boards are designed to be supplied from a standard ATX power supply. Hot plugging any of the power connector is not allowed. Hot plugging might damage the board. In other words, turn off main supply etc. to make sure all the power lines are turned off when connecting to the motherboard.
MITX-DNV0 Series - User Guide, Rev. 1.2 Signal Description Ground Table 18: Signal Description Signal Description POWER OK POWER_OK is a power good signal and should be asserted high by the power supply to indicate that the +5VDC and +3.3VDC outputs are above the undervoltage thresholds of the power supply.
MITX-DNV0 Series - User Guide, Rev. 1.2 7.2. CPU / System Fan Wafer (FAN1 & FAN2) The CPU Fan Wafer (FAN1) is used for the connection of the Fan for the CPU. The System Fan Wafer (FAN2) can be used to power, control and monitor a fan for chassis ventilation etc.
MITX-DNV0 Series - User Guide, Rev. 1.2 7.3. SATA (Serial ATA) Port 1 ~ Port 6 Connector (SATA1 ~ SATA6) The SATA connectors supply the data connection for the SATA hard disk and are SATA 3.0 compatible. Figure 12: SATA Port 1 ~ Port 6 Connector SATA1 ~ SATA6...
MITX-DNV0 Series - User Guide, Rev. 1.2 7.4. USB Connectors (Internal) (CN17) The USB port pin header CN17 supports two USB 2.0 ports. Figure 13: USB 2.0 Port 1, 2 Pin Header CN17 Table 24: Pin Assignment CN5 Signal Note...
MITX-DNV0 Series - User Guide, Rev. 1.2 Signal Note Power Button + Power Button - Power LED - SM_ALERT# BAT_LOW# SMBus Data SMBus Clock Table 29: Signal Description Signal Description Power LED - System Power LED. The power LED lights up when users turn on the system power, and blinks when the system is in sleep mode.
MITX-DNV0 Series - User Guide, Rev. 1.2 7.6. Serial COM2 Ports (CN16) Figure 16: Serial COM CN16 Table 30: Pin Assignment CN16 RS232 Signal RS422 Signal Half Duplex Full Duplex Note RS485 Signal RS485 Signal DATA- DATA+ The COM ports need to install an OS patch from ITE. The patch is only available for Windows and is not available Linux.
Page 39
MITX-DNV0 Series - User Guide, Rev. 1.2 Signal Description RX+/- Received Data differential pair receives data from the communications link. Power Supply GND signal www.quanmax.com // 39...
MITX-DNV0 Series - User Guide, Rev. 1.2 7.8. PS/2 Keyboard and Mouse Wafer (CN21) Attachment of a PS/2 keyboard / mouse can be done through the pinrow connector CN21. Both interfaces utilize open-drain signalling with on-board pull-up. Figure 18: PS/2 Keyboard / Mouse Wafer CN21...
MITX-DNV0 Series - User Guide, Rev. 1.2 7.9. M.2 Key-B SSD Slot (M2B1) The MITX-DNV0 Series supports M.2 modules in format 2280 with Key B. The M.2 specification enables one SATA3.0 (6 Gb/s) SSD socket to be exposed. Figure 19: M.2 Key-B SSD Slot M2B1 SATA M.2 requires the following BIOS depending on the class code options below.
Page 43
MITX-DNV0 Series - User Guide, Rev. 1.2 Signal Note SATA_RX+ SATA_RX- SATA_TX- SATA_TX+ www.quanmax.com // 43...
Page 44
MITX-DNV0 Series - User Guide, Rev. 1.2 Signal Note +3.3V +3.3V +3.3V www.quanmax.com // 44...
MITX-DNV0 Series - User Guide, Rev. 1.2 7.10. mPCIe / mSATA Socket (MPCIE1) Full-sized Mini-PCI Express V1.2 socket (MPCIE1). Socket MPCIE1 supports mPCIe, mSATA, USB2.0 and SIM-card socket. The SIM-card socket makes it possible to use a 3G/4G-wireless modem in this mPCIe slot. The USB does support WAKE function.
MITX-DNV0 Series - User Guide, Rev. 1.2 7.11. SIM Interface Wafer for MPCIE1 (CN4) Figure 21: SIM Interface Wafer CN4 Table 37: Pin Assignment CN4 Signal Description Note UIM_PWR Power +5V or +3.3V UIM_DATA Input or Output for serial data...
MITX-DNV0 Series - User Guide, Rev. 1.2 7.12. PCIE x8 Socket (PCIE1) The 8-lane (x8) PCI Express slot connector can be used for external PCI Express cards inclusive graphics card and dedicated TMDS passive card. The slot is located nearest the edge of the board. Maximum theoretical bandwidth using 8 lines is 8 GB/s.
Page 49
MITX-DNV0 Series - User Guide, Rev. 1.2 Side B Connector Side A Connector Signal Description Signal Description Ground PERp1 Receiver Lane 1, differential pair Ground PERn1 PETp2 Transmitter Lane 2, Ground differential pair PETn2 Ground Ground PERp2 Receiver Lane 2, differential...
MITX-DNV0 Series - User Guide, Rev. 1.2 7.14. Wireless Activity LED Header for MPCIE1 (CN5) Figure 24: Wireless Activity LED Header CN5 Table 40: Pin Assignment CN5 Signal Description Note LED+ LED- 7.15. General Purpose LED Wafer (CN25) Figure 25: General Purpose LED Wafer CN25...
MITX-DNV0 Series - User Guide, Rev. 1.2 Figure 26: Programming example 1 Programmed High for LED on GPLED# Figure 27: Programming example 2 Programmed Low for LED on GPLED# www.quanmax.com // 52...
MITX-DNV0 Series - User Guide, Rev. 1.2 7.16. Switches and Jumpers The product has several jumpers which must be properly configured to ensure correct operation. Figure 28: Jumper Connector For a three-pin jumper (see Figure 25), the jumper setting is designated “1-2” when the jumper connects pins 1 and 2.
MITX-DNV0 Series - User Guide, Rev. 1.2 Jumper Position Description Pin 1-2 Pin 2-3 +5VSB “X” = Jumper set (short) and “-” = jumper not set (open) 7.16.3. AT / ATX Power Mode Selection (JP3) Figure 31: AT / ATX Power Mode Selection JP3...
MITX-DNV0 Series - User Guide, Rev. 1.2 Table 46: Pin Assignment JP10 Jumper Position Description Pin 1-2 Pin 2-3 Normal Clear CMOS “X” = Jumper set (short) and “-” = jumper not set (open) 7.16.6. Flash Security Override Selection (JP11)
Page 56
MITX-DNV0 Series - User Guide, Rev. 1.2 Jumper Position Description Pin 1-2 Pin 3-4 Pin 5-6 +12V “X” = Jumper set (short) and “-” = jumper not set (open) www.quanmax.com // 56...
Supervisor Password (see Security menu), press <RETURN>, and proceed with step 5. 5. A setup menu will appear. The MITX-DNV0 Series uEFI BIOS setup program uses a hot key-based navigation system. A hot key legend bar is located on the bottom of the setup screens.
MITX-DNV0 Series - User Guide, Rev. 1.2 8.2. Setup Menus The Setup utility features shows six menus in the selection bar at the top of the screen: Main Advanced Power Boot Security Save & Exit The Setup menus are selected via the left and right arrow keys.
MITX-DNV0 Series - User Guide, Rev. 1.2 Figure 36: BIOS Main Menu Screen System Data and Time BIOS SETUP UTILITY Main Advanced Power Boot Security Save & Exit Product Information Product Name MITX-DNV7 BIOS Version R0.09 (x64) BIOS Build Date...
MITX-DNV0 Series - User Guide, Rev. 1.2 8.2.2. Advanced Setup Menu The Advanced setup menu provides sub-screens and functions for advanced configurations. The following sub- screen functions are included in the menu: LAN Configuration FIA HSIO12 Configuration ...
MITX-DNV0 Series - User Guide, Rev. 1.2 Figure 38: BIOS Advanced Menu - FIA HSIO12 Configuration BIOS SETUP UTILITY Main Advanced Power Boot Security Save & Exit Flexible I/O Adapter HSIO12 Configuration HSIO12 I/O amount Full Avtive Lane 8:PCIE-C6139(VGA) [PCIE Enabled]...
Page 63
MITX-DNV0 Series - User Guide, Rev. 1.2 Feature Option Description (Driven High)] cards that implement radio frequency applications. www.quanmax.com // 63...
MITX-DNV0 Series - User Guide, Rev. 1.2 Figure 39: BIOS Advanced Menu - CPU Chipset Configuration BIOS SETUP UTILITY Main Advanced Power Boot Security Save & Exit CPU Chipset Configuration EIST [Enabled] Turbo Mode [Enabled] CPU C State [Enabled] → ←: Select Screen Active Processor Core ↑...
MITX-DNV0 Series - User Guide, Rev. 1.2 Figure 40: BIOS Advanced Menu - SATA Configuration BIOS SETUP UTILITY Main Advanced Power Boot Security Save & Exit SATA Configuration SATA Controller 0 [Enabled] SATA-0 Port Multiplier [Disabled] SATA Controller 1 [Enabled]...
MITX-DNV0 Series - User Guide, Rev. 1.2 Figure 41: BIOS Advanced Menu - USB Configuration BIOS SETUP UTILITY Main Advanced Power Boot Security Save & Exit USB Configuration USB Devices: → ←: Select Screen 1 Keyboard, 2 Mice, 2 Hubs ↑...
MITX-DNV0 Series - User Guide, Rev. 1.2 Figure 44: BIOS Advanced Menu - DIO Configuration BIOS SETUP UTILITY Main Advanced Power Boot Security Save & Exit DIO Configuration User Configuration [Disabled] DIO_0* [Output High] DIO_1* [Output High] DIO_2* [Output High]...
MITX-DNV0 Series - User Guide, Rev. 1.2 Figure 45: BIOS Advanced Menu - Super IO Configuration BIOS SETUP UTILITY Main Advanced Power Boot Security Save & Exit Super IO Configuration > Serial Port 1 Configuration → ←: Select Screen > Serial Port 2 Configuration ↑...
MITX-DNV0 Series - User Guide, Rev. 1.2 Feature Option Description Serial Port 1 Type [RS232], [RS422], Select an appropriate type for Serial Port 1. [RS485] RS485 Duplex Mode [Half Duplex], [Full Select an appropriate RS485 Duplex Mode. Duplex] RS485 Auto Flow [Disabled], [Enabled] Select whether to enable or disable RS485 Auto Flow Control.
MITX-DNV0 Series - User Guide, Rev. 1.2 Figure 50: BIOS Advanced Menu - Serial Port Console Redirection - Legacy Console Redirection Settings BIOS SETUP UTILITY Main Advanced Power Boot Security Save & Exit Legacy Console Redirection Settings Redirection COM Port [COM1] →...
MITX-DNV0 Series - User Guide, Rev. 1.2 Figure 51: BIOS Advanced Menu - Serial Port Console Redirection - Out-of-Band Mgmt Port Console Redirection Settings BIOS SETUP UTILITY Main Advanced Power Boot Security Save & Exit Out-of-Band Mgmt Port [COM1] Terminal Type...
MITX-DNV0 Series - User Guide, Rev. 1.2 Figure 52: BIOS Advanced Menu - H/W Monitor BIOS SETUP UTILITY Main Advanced Power Boot Security Save & Exit PC Health Status > Smart FAN Configuration CPU Temperature-DTS : +31 C CPU Temperature-Diode...
MITX-DNV0 Series - User Guide, Rev. 1.2 8.2.3. Power Setup Menu The Power setup menu provides functions and a sub-screen for power configurations. The following sub-screen function is included in the menu: WatchDog Timer Configuration Figure 53: BIOS Power Setup Menu...
MITX-DNV0 Series - User Guide, Rev. 1.2 8.2.4. Boot Setup Menu The boot setup menu lists the for boot device priority order, that is generated dynamically. Figure 55: BIOS Boot Setup Menu BIOS SETUP UTILITY Main Advanced Power Boot Security Save &...
The Security setup menu provides information about the passwords and functions for specifying the security settings. The passwords are case-sensitive. The MITX-DNV0 Series provides no factory-set passwords. If there is already a password installed, the system asks for this first. To clear a password, simply enter nothing and acknowledge by pressing <RETURN>.
MITX-DNV0 Series - User Guide, Rev. 1.2 8.2.5.1. Remember the password It is highly recommended to keep a record of all passwords in a safe place. Forgotten passwords results in being locked out of the system. If the system cannot be booted because the User Password or the Supervisor Password are not know, contact Quanmax Support for further assistance.
MITX-DNV0 Series - User Guide, Rev. 1.2 8.2.6. Save & Exit Setup Menu The exit setup menu provides functions for handling changes made to the UEFI BIOS settings and the exiting of the setup program. Figure 57: BIOS Boot Setup Menu...
MITX-DNV0 Series - User Guide, Rev. 1.2 Appendix A: List of Acronyms The following table does not contain the complete acronyms used in signal names, signal type definitions or similar. A description of the signals is included in the I/O Connector and Internal connector chapters within this user guide.
MITX-DNV0 Series – User Guide, Rev. 1.2 About Quanmax Founded in 1999, Quanmax is committed to supply high-quality embedded computing systems and solutions to help its clients develop a variety of computer-aided facilities for individual users and business firms in all industries including but not limited to the following four categories: Infotainment, Automation, IoT and Network Communications, on the basis of different levels of customization.