Quanmax KEEX-2010 User Manual page 60

Thermal Management
Allows you to select the Thermal Monitor.
Options - Thermal Monitor1 (on-die throttling), Thermal Monitor2 (Ratio and VID transition).
Hard Disk Boot Priority
Press Enter to select Hard Disk Boot Device Priority.
Virus Warning
Allows you to choose the VIRUS Warning feature for IDE Hard Disk boot sector protection. If this function
is enabled and someone attempts to write data into this area, the BIOS will show a warning message on
the screen and sound an alarm beep.:
CPU Internal Cache
Options –Disabled, Enabled
Quick Power On Self Test:
This option speeds up the Power On Self Test (POST) which runs when you power up the computer. If it is
set to Enabled, BIOS will shorten or skip some check items during POST.
First/Second/Third Boot Device:
The BIOS will attempt to load the operating system from the devices specified here as the first, second and
third boot devices.
Options - Floppy, LS/ZIP, Hard Disk, CDROM, LAN and Disabled.
Boot Other Device:
When enabled, the system will search all other possible locations for an operating system if it fails to find
one in the devices specified under the first, second, and third boot devices.
Options - Enabled, Disabled
4-10 KEEX-2010 Series User Guide
Enabled - Activates automatically when the system boots up and causes a warning
message to appear when anything attempts to access the boot sector or hard disk partition
table.
Disabled - No warning message will appear when anything attempts to access the boot
sector or hard disk partition table.
Enabled - Enable quick POST
Disabled - Normal POST