Removing A So-Dimm; Figure 3-2. Fully Insert The So-Dimm Memory Module Into The Onboard Socket; Figure 3-3. Press Down On The So-Dimm Memory Module To Lock It In Place - Quanmax KEEX-2010 User Manual

4) Fully insert the module into the socket until a "click" is heard.
.
5) Press down on the SO-DIMM so that the tabs of the socket lock on both sides of the module.
.

Removing a SO-DIMM:

To remove the SO-DIMM, use your fingers or a small screwdriver to carefully push away the tabs that
secure either side of the SO-DIMM. Lift it out of the socket.
Make sure you store the SO-DIMM in an anti-static bag. The socket must be populated with memory
modules of the same size and manufacturer.
3-4 KEEX-2010 Series User Guide

Figure 3-2. Fully insert the SO-DIMM Memory Module into the onboard socket

Figure 3-3. Press down on the SO-DIMM Memory Module to lock it in place