Table of Contents
Advertisement
How to Use This Guide
This guide is designed to be used as step-by-step instructions for installation, and as a reference for
operation, troubleshooting, and upgrades.
Note: Driver downloads and additional information are available under
Downloads on our web site: www.quanmax.com.
The following is a summary of the chapter contents:
Chapter 1, Introduction, presents the product specifications and system architecture for the
KEEX-2010.
Chapter 2, Jumpers and Connectors, shows the definitions and locations of jumpers and
connectors that you can easily configure for your system
Chapter 3,System Installation, describes how to properly mount the CPU, heatsink and main
memory.
Chapter 4, BIOS Setup Information, specifies the meaning of each setup parameter and
describes how to get advanced BIOS performance.
Chapter 5, Driver Installation, provides information on installing installing the drivers for the
KEEX-2010.
Appendix A, System Resources, provides information on IRQ lines, DMA channels, memory
and I/O address maps, PCI devices, and I2C bus.
KEEX-2010 Series User Guide
.
How to Use This Guide
-xv
Advertisement
Table of Contents
