Quanmax KEEX-2010 User Manual page 58

IDE HDD Auto-Detection
Options - Press Enter
Press Enter to auto-detect the HDD on this channel. If detection is successful, the utility will fill the
remaining fields on this menu.
IDE Channel 0/2 Master/Slave
Options - None, Auto and Manual
Selecting "Manual" lets you set the remaining fields on this screen. Selects the type of fixed disk. "User
Type" will let you select the number of cylinders, heads, etc. Note: PRECOMP=65535 means NONE!
Access Mode
Options - CHS, LBA, Large and Auto
Choose the access mode for this hard disk
Capacity
Options - Auto Display your disk drive size
Disk drive capacity (approximate). Note that this size is usually slightly greater than the size of a formatted
disk given by a disk-checking program.
*The following options are selectable only if the 'IDE Primary/Secondary Master' item is set to
'Manual'
Cylinder
Options - Min = 0, Max = 65535
Set the number of cylinders for this hard disk.
Head
Options - Min = 0, Max = 255
Set the number of read/write heads.
Precomp
Options - Min = 0, Max = 65535
**** Warning: Setting a value of 65535 means no hard disk!
Landing zone
Options - Min = 0, Max = 65535
Sector
Options - Min = 0, Max = 255
Number of sectors per track
4-8 KEEX-2010 Series User Guide