Advanced Bios Features - Quanmax KEEX-2010 User Manual

Boot Up Floppy Seek
If enabled, the system will seek for disk drives during boot up. Disabling will speed boot up.
Options - Enabled, Disabled
Boot Up NumLock Status
Select the powe- on state for NumLock.
Options - On, Off
Typematic Rate Setting
Manually set the Typematic Rate or the Typematic Delay.
Typematic Rate (Chars/Sec)
The highest number of characters that can be typed in a second on the keyboard.
Typematic Delay (Msec)
The time (in milliseconds) needed before pressing again a key on the keyboard.
Security Option
Select whether a password is required every time the system boots or only when you enter setup.
System - The system will not boot and access to Setup will be denied if the correct password
is not entered at the prompt.
Setup - The system will boot, but access to Setup will be denied if the correct password is not
entered at the prompt.
Note: To disable security, select PASSWORD SETTING at the Main Menu. You will be asked to enter
password. Do not type anything and just press <Enter> to disable security. Once security is disabled, the
system will boot and you can enter Setup freely.
MPS Version Control For OS
This option is specifies the MPS (Multiprocessor Specification) version for your operating system. MPS
version 1.4 added extended configuration tables to improve support for multiple PCI bus configurations and
improve future expandability.
Options - 1.4, 1.1
OS Select For DRAM > 64MB
This option allows the system to access greater than 64MB of DRAM memory when used with OS/2 that
depends on certain BIOS calls to access memory.
Options - OS2, Non-OS2
KEEX-2010 Series User Guide

Advanced BIOS Features

4-11