Giga LAN Controller
Options - Enabled, Disabled.
SuperIO Device
Press Enter to select SuperIO Device.
Onboard Serial Port 1
Onboard Serial Port 2
UART2 Transmission Type
Onboard Parallel Port
Parallel Port Mode
x EPP Mode Select
x ECP Mode Use DMA
↑↓→←Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values
Onboard Serial Port 1/2
Select an address and corresponding interrupt for the first and second serial ports.
Options - 3F8/IRQ4, 2E8/IRQ3, 3E8/IRQ4, 2F8/IRQ3, Disabled and Auto.
UART2 Transmission Type
This item allows you to select the UART2 Transmission type.
Options - RS-232, RS-422, RS-485.
Onboard Parallel Port
This item allows you to determine which access onboard parallel port controller goes with which I/O address.
Options - 3BC/IRQ7, 378/IRQ7, 278/IRQ5 and Disabled.
Parallel Port Mode
Select an operating mode for the onboard parallel (printer) port. Select Normal, Compatible, or SPP unless
you are certain your hardware and software both support one of the other available modes.
Options - SPP, EPP, ECP and ECP+EPP.
EPP Mode Select
Select either EPP1.7 or EPP1.9.
KEEX-2010 Series User Guide
SuperIO Device
[3F8/IRQ4]
[2F8/IRQ3]
[RS-232]
[378/IRQ7]
[SPP]
EPP1.7
3
F6: Fail-safe defaults
F7: Optimized Defaults
Table 4-12. SuperIO Device
Item Help
__________________________
Menu Level
Integrated Peripherals
4-17