Table 4-13. Usb Device Setting; Usb Device Setting - Quanmax KEEX-2010 User Manual

ECP Mode Use DMA
Select a DMA channel for the parallel port for use during ECP mode.
Options - 3, 1.
PWRON After PWR-Fail
Allows you to set the the "Power On After Power Fail" function.
Options - Former-Status, On, Off

USB Device Setting

Press Enter to select USB Device Setting.
Onboard USB 1.0 Controller
Turns on/off the onboard Universal Host Controller.
Options - Enabled, Disabled
Onboard USB 2.0 Controller
Turns on/off the onboard Enhanced Host Controller.
Options - Enabled, Disabled
USB Operation Mode
High Speed mode will automatically operate at either high speed or full/low speed, depending on the
device. Full/Low Speed mode will operate at full/low speed.
Options - High Speed, Full/Low Speed
4-18 KEEX-2010 Series User Guide
Onboard USB 1.0 Controller
Onboard USB 2.0 Controller
USB Operation Mode
USB Keyboard Function
USB Mouse Function
USB Storage Function
*** USB Mass Storage Device Boot Setting ***
USB Mass Storage Device
↑↓→←Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-safe defaults

Table 4-13. USB Device Setting

USB Device Setting
[Enabled]
[Enabled]
[High Speed]
[Enabled]
[Enabled]
[Enabled]
[Auto mode]
F7: Optimized Defaults
Item Help
__________________
Menu Level