Memory Module Installation
DDR2 SO-DIMMs have 200-pins and one notch that will match with the onboard SO-DIMM socket. Make
sure that your module is the correct specification for your board.
Installing a SO-DIMM
Carefully follow the steps below in order to install the SO-DIMMs:
1) To avoid generating static electricity and damaging the SO-DIMM, ground yourself by touching a
grounded metal surface or use a ground strap before you touch the SO-DIMM.
2) Do not touch the connectors of the SO-DIMM. Dirt or other residue may cause a malfunction.
3) Hold the SO-DIMM with its notch aligned with the memory socket of the KEEX-2010 and insert it at a
30-degree angle into the socket.
.
Figure 3-1. Align the SO-DIMM Memory Module with the onboard socket
KEEX-2010 Series User Guide
Memory Module Installation
3-3