Main Menu; Table 4-1. Main Menu - Quanmax KEEX-2010 User Manual

Main Menu

Once you enter the AwardBIOS™ CMOS Setup Utility, the Main Menu will appear on the screen. The Main
Menu allows you to select from several setup functions and two exit choices. Use the arrow keys to select
among the items and press <Enter> to accept your choice and enter the sub-menu.
Note: A brief description of each highlighted selection appears at the bottom of the screen.
Setup Items
The main menu includes the following main setup categories. Recall that some systems may not include
all entries. Each category is described in detail in the sections which follow.
Standard CMOS Features
Use this menu for basic system configuration.
Advanced BIOS Features
Use this menu to set the Advanced Features available on your system.
Advanced Chipset Features
Use this menu to change the values in the chipset registers and optimize your system's performance.
Integrated Peripherals
Use this menu to specify your settings for integrated peripherals.
Power Management Setup
Use this menu to specify your settings for power management.
4-4 KEEX-2010 Series User Guide
Phoenix - AwardBIOS CMOS Setup Utility
Standard CMOS Features
Advanced BIOS Features
Advanced Chipset Features
Integrated Peripherals
Power Management Setups
PnP/PCI Configurations
PC Health Status
Esc: Quit
F10: Save & Exit Setup
Frequency/Voltage Control
Load Fail-Safe Defaults
Load Optimized Defaults
Set Supervisor Password
Set User Password
Save & Exit Setup
Exit Without Saving
Time, Date, Hard Disk Type....

Table 4-1. Main Menu

↑ ↓ →←: Select Item