Installing the Memory Tray
FIGURE 4-7
2. Install the top cover.
See
3. Slide the server into the rack.
See
4. Reconnect the power cord (or cords) to the power supply (or supplies).
Verify that the AC Present LED is lit.
See
5. Power on the server.
See
Section 6.1, "Installing the Top Cover" on page
Section 6.3, "Returning the Server to the Normal Rack Position" on page
Section 6.4, "Powering On the Server" on page
Section 6.4, "Powering On the Server" on page
6-2.
6-5.
6-5.
Chapter 4
Servicing Motherboard Components
6-4.
4-13