Servicing The Dvd/Usb Module; Removing The Dvd/Usb Module - Sun Microsystems Sun Fire X4450 Service Manual

3.5

Servicing the DVD/USB Module

The DVD drive and front USB board are mounted in a removable module that is
accessible from the front panel of the system. The DVD/USB module must be
removed from the drives cage to service the drives backplane.
Note – This is a customer-replaceable unit.
3.5.1

Removing the DVD/USB Module

1. Remove media from the drive.
2. Power off the server.
See
3. Attach an antistatic wrist strap.
See
Measures" on page
4. Remove the Sun Fire X4450 HD7 drive.
See
locations.
5. Release the DVD/USB module from the drives backplane. (
Use the finger indent in the drives bay below the DVD/USB module to slide the
handle out and use it to pull out and detach the module from the backplane.
6. Slide the DVD/USB module out of the drives cage.
7. Place the module on an antistatic mat.
3-20 Sun Fire X4450 Server Service Manual • November 2009
Section 2.4, "Powering Off the Server" on page
Section 2.7, "Performing Electrostatic Discharge and Antistatic Prevention
2-9.
Section 1.2, "Sun Fire X4450 Server Chassis Overview" on page 1-3
2-3.
for drive
)
FIGURE 3-15