1. Connect that the power cord (or cords) to the power supply (or supplies) on the
rear panel as shown in
FIGURE 6-4
2. Verify that standby power is on.
In standby power mode, the Power/OK LED on the front panel flashes.
3. Use a pen, or other pointed object, to press and release the recessed Power
button on the server front panel.
When the main power is applied to the server, the Power/OK LED next to the
Power button lights and remains lit, as shown in
Front Panel
FIGURE 6-5
6-6
Sun Fire X4450 Server Service Manual • November 2009
FIGURE 6-4
Power Supplies
Rear Panel
Power/OK LED
.
FIGURE 6-5
.