Installing The Top Cover - Sun Microsystems Sun Fire X4450 Service Manual
For 2u systems
Hide thumbs
Also See for Sun Fire X4450:
- Installation manual (81 pages) ,
- Configuration manual (13 pages) ,
- Safety and compliance manual (22 pages)
Table of Contents
Advertisement
6.1
Installing the Top Cover
If you removed the top cover, perform the following steps to replace it:
1. Place the top cover on the chassis.
Set the cover down so that it hangs over the rear of the server by about an inch
(25.4 mm).
2. Slide the top cover forward until it seats (
Installing the Top Cover
FIGURE 6-1
6-2
Sun Fire X4450 Server Service Manual • November 2009
).
FIGURE 6-1
Advertisement
Table of Contents
