Sun Microsystems Sun Fire X4450 Service Manual page 112

Installing a Fan Power Board
FIGURE 5-2
2. Secure the board to the chassis with a Phillips screw.
3. Reinstall the fan modules.
See
4. Install the top cover.
See
5. Slide the server into the rack.
See
6. Reconnect the power cord (or cords) to the power supply (or supplies).
Verify that the AC Present LED is lit.
See
5-4 Sun Fire X4450 Server Service Manual • November 2009
Section 3.3.5, "Installing a Fan Module" on page
Section 6.1, "Installing the Top Cover" on page
Section 6.3, "Returning the Server to the Normal Rack Position" on page
Section 6.4, "Powering On the Server" on page
3-13.
6-2.
6-5.
6-4.