Note – You can create RAID volumes with SAS HDs and SATA SSDs, as long as you
do not mix them in a same volume.
3.2.2.1
Servicing SSDs
The solid-state drive and the adapter bracket is compatible with the server's hard
drive slot. Therefore, the procedure to remove an SSD is the same as replacing the
hard drive. See:
Section 3.2.4, "Removing a Hard Drive or SSD" on page 3-5
■
Section 3.2.5, "Installing a Hard Drive or SSD" on page 3-7
■
Section 3.2.6, "Using Drive Fillers" on page 3-8
■
3.2.2.2
SSD Minimum Required Firmware
BIOS/ILOM Firmware
■
■
Adaptec Firmware
■
■
SSD firmware
■
3.2.3
Drive Status LED Reference
FIGURE 3-2
Drives Status LEDs
FIGURE 3-2
3-4
Sun Fire X4450 Server Service Manual • November 2009
BIOS: S93_3B56
ILOM: 3.0.3.30
Adaptec FW: 16732
LSI FW: 1.27.02, MPTBIOS: 6.26.00
Intel SSD FW: 845C8626
shows the
drives status LEDs on the
Sun Fire X4450 server.