Using Drive Fillers - Sun Microsystems Sun Fire X4450 Service Manual

Installing a Drive
FIGURE 3-4
4. Close the latch to lock the drive in place.
5. Do one of the following:
■
■
3.2.6

Using Drive Fillers

All drive slots in the Sun Fire X4450 Server must have drive fillers in place during
operation to maintain airflow. To remove fillers, pull the ejector and pull the filler out
of the chassis. (
3-8 Sun Fire X4450 Server Service Manual • November 2009
If you have hot-plugged the drive:
Configure the drive. See one of the following HBA documents:
For Sun StorageTek: Sun StorageTek RAID Manager Software User's Guide
For LSI MegaRAID Storage Manager (MSM): Sun LSI 106x RAID User's Guide
If you have cold-plugged the drive:
Restore power to the server. Do the procedure described in
"Powering On the Server" on page
)
FIGURE 3-5
6-5.
Section 6.4,