Installing The Front Control Panel Light Pipe Assembly - Sun Microsystems Sun Fire X4450 Service Manual

2. Remove the drives backplane.
See
3. Remove the three No. 2 Phillips screws securing the front control panel light
pipe assembly to the drives cage. (
4. Slide the light pipe assembly out of the drives cage.
FIGURE 5-7
5.4.2 Installing the Front Control Panel Light Pipe
Assembly
1. Align the light pipe assembly with the mounting holes on the drives cage.
2. Secure the light pipe assembly with three No. 2 Phillips screws.
Section 5.3.1, "Removing the Drives Backplane" on page
Removing Light Pipe Assembly
Chapter 5
)
FIGURE 5-7
Servicing Infrastructure Boards and Components
5-8.
5-11