Sun Microsystems Sun Fire X4450 Service Manual page 106

Internal USB Port
FIGURE 4-22
9. Connect AC power cables.
See
10. Power on the server.
See
A message appears stating that the BMC was not found.
The server takes up to three minutes to boot.
11. Press F2 to enter system BIOS, and verify that the Flash device is in the boot
order.
12. After the flash device has booted, run the following command:
socflash.exe SP binary backup file
For example:
socflash.exe s92v092.bin backup.bin
4-48 Sun Fire X4450 Server Service Manual • November 2009
Section 6.4, "Powering On the Server" on page
Section 6.4, "Powering On the Server" on page
6-5.
6-5.