4.7
Servicing the Battery
The battery maintains system time when the server is powered off and a time server
is unavailable. If the server fails to maintain the proper time when powered off and
not connected to a network, replace the battery.
You need a small (No. 1 flat-blade) screwdriver.
Note – This is a customer-replaceable unit.
Caution – Ensure that all power is removed from the server before removing or
installing the battery. You must disconnect the power cables from the system before
performing this procedure.
Battery Location
FIGURE 4-16
4-28
Sun Fire X4450 Server Service Manual • November 2009