6. Connect any data cables you removed to service the PCIe cards.
7. Reconnect the power cord (or cords) to the power supply (or supplies).
Verify that the AC Present LED is lit.
See
Installing a PCIe Riser
FIGURE 4-12
4.6
Servicing PCIe Cards
See
Section 4.6.1, "Sun Fire X4450 PCIe Card Guidelines" on page 4-23
configuration guidelines.
Note – This is a customer-replaceable unit.
Caution – This procedure requires that you handle components that are sensitive to
static discharge. This sensitivity can cause the component to fail. To avoid damage,
ensure that you follow antistatic practices as described in
Electrostatic Discharge and Antistatic Prevention Measures" on page
4-22
Sun Fire X4450 Server Service Manual • November 2009
Section 6.4, "Powering On the Server" on page
6-5.
for PCIe card
Section 2.7, "Performing
2-9.