Lock the Memory Mezzanine Tray
For server systems that use a memory mezzanine tray (for example, the Sun Fire
X4450), you must lock the mezzanine tray before you install or move the server.
Caution – Unsecured trays or cards are easily dislodged when shipped or moved.
●
See the top cover service label for instructions about securing the mezzanine
tray.
Test Installed DIMMs
Verify that the server can see all installed DIMMs.
Testing Installed Memory
•
Reassemble the server and use one of the following methods to verify the
DIMMs:
• Boot from the Tools and Drivers CD/DVD and access the diagnostics by
selecting the option to run hardware diagnostics (option 1).
• Log in to the service processor's (SP) ILOM using ssh or a browser and the IP
address of the SP.
How to Add a DVD/USB Drive
The server ships with filler panels for a vacant DVD drive slot and each vacant
■
HD slot.
You must install the DVD drive/USB hub before you install the hard drives.
■
Adding a DVD/USB Drive Unit
1
Eject all hard drives and HD filler panels.
2
Remove the DVD filler panel.
3
Slide the DVD/USB drive
the backplane.
4
Populate the HD slots with hard drives or hard drive filler panels.
5
Test the DVD drive by booting the server using the Tools and Drivers DVD and
accessing the Pc-Check diagnostics.
* Use the -09 (or later) revision of the DVD/USB drive unit.
*
unit into the DVD slot and engage the connector on
How to Add Components to Your Limited Configuration Server
5