Figure 1-4 Hard Drive Status Leds - Sun Microsystems Netra 440 Service Manual

Hard Drive Status LEDs
Each hard drive has its own status LEDs directly above the drive.
FIGURE 1-4
The following table describes the hard drive LEDs.
TABLE 1-3
Name Icon
OK-to-Remove
Service Required
Activity
OK-to-Remove LED
SCC
Hard Drive Status LEDs
Hard Drive LEDs
Description
This blue LED lights when the hard drive has been taken offline and is safe
to remove from the system.
Reserved for future use.
This green LED lights when the system is powered on and a hard drive is
present in the monitored drive slot. This LED flashes slowly during the hard
drive hot-swap procedure. It flashes rapidly when the hard drive is
spinning up or down, or during read/write activity.
Service Required LED
Chapter 1 Identifying the Netra 440 Server FRUs and LEDs
Activity LED
7