Using the Menu Interface
Starting and Ending a Menu Session
Asterisk indicates a
that requires a reboot
Figure 3-2. An Asterisk Indicates a Configuration Change Requiring a Reboot
1. In the current session, if you have not made configuration changes that
require a switch reboot to activate, return to the Main Menu and press
(zero) to log out. Then just exit from the terminal program, turn off the
terminal, or quit the Telnet session.
2. If you have made configuration changes that require a switch reboot—
that is, if an asterisk (*) appears next to a configured item or next to Switch
Configuration in the Main Menu:
a. Return to the Main Menu.
b. Press  to select Reboot Switch and follow the instructions on the
Rebooting the switch terminates the menu session, and, if you are using
Telnet, disconnects the Telnet session.
(See "Rebooting To Activate Configuration Changes" on page 3-13.)
3. Exit from the terminal program, turn off the terminal, or close the Telnet