Snmp Communities - HP ProCurve 2810 Series Management And Configuration Manual

Configuring for Network Management Applications
Using SNMP Tools To Manage the Switch
12-12

SNMP Communities

SNMP commuities are supported by the switch to allow management
application that use version 2c or version 1 to access the switch. The
communities are mapped to Group Access Levels that are used for version 2c
or version 1 support. For more information see "Group Access Levels" on page
12-11. This mapping will happen automatically based on the communities
access privileges, but special mappings can be added with the snmpv3
community command.
Syntax: [no] snmpv3 community
This command maps or removes a mapping of a
community name to a group access level. To remove a
mapping you only need the
< index < index-name >>
This is an index number or title for the mapping. The
values of 1-5 are reserved and can not be mapped.
< name < com-name >>
This is the community name that is being mapped to a
group access level
< sec-name < security-name >>
This is the group level that the community is being
mapped. For more information see "Group Access
Levels" on page 12-11.
< tag < tag-value >>
This is used to specify which target address may have
access via this index reference.
index_name.