Using The Pcm Server For Switch Web Help - HP ProCurve 2810 Series Management And Configuration Manual

N o t e

Using the PCM Server for Switch Web Help

For ProCurve devices that support the "Web Help" feature, you can use the
PCM server to host the switch help files for devices that do not have HTTP
access to the ProCurve Support Web site.
1. Go to the ProCurve Support web site to get the Device Help files:
http://www.hp.com//rnd/device_help/
2. Copy the Web help files to the PCM server, under:
C:\\program files\hewlett-packard\pnm\server\webroot\
rnd\sevice_help\help\hpwnd\webhelp
3. Add an entry, or edit the existing entry in the Discovery portion of the
global properties (globalprops.prp) in PCM to redirect the switches to the
help files on the PCM server. For example:
Global {
TempDir=data/temp
...
Discovery{
...
...
DeviceHelpUrlRedirect=http://15.29.37.12.8040/rnd/device_help
...
}
}
You will enter the IP address for your PCM server. 8040 is the standard port
number to use.
4. Restart the Discovery process for the change to be applied.
Changing the Discovery's Global properties file will redirect the Device Help
URL for all devices.
If you just want to change the Device Help URL for a particular device, then
go to the Configuration tab on the Web UI for that device and select the
"Support/Mgmt URL" button. Edit the entry in the "Management Server URL"
field for the device to point to the PCM server; for example:
http://15.29.37.12.8040/rnd/device_help
Using the Web Browser Interface
Support/Mgmt URLs Feature
5-15