How To Move Between Levels - HP ProCurve 2810 Series Management And Configuration Manual

How To Move Between Levels

Change in Levels Example of Prompt, Command, and Result
Operator level
ProCurve> enable
to
Password:_
Manager level
ProCurve#_
Manager level
ProCurve# config
to
ProCurve(config)#
Global configuration
level
Global configuration
ProCurve(config)# vlan 10
level
ProCurve(vlan-10)#
to a
Context configuration
level
Context configuration
ProCurve(vlan-10)# interface e 3
level
ProCurve(int-3)#
to another
Context configuration
level
Move from any level
ProCurve(int-3)# exit
to the preceding level
ProCurve(config)# exit
ProCurve# exit
ProCurve>
Move from any level ProCurve(int-3)# end
to the Manager level
ProCurve#
—or—
ProCurve(config)# end
ProCurve#
Moving Between the CLI and the Menu Interface. When moving
between interfaces, the switch retains the current privilege level (Manager or
Operator). That is, if you are at the Operator level in the menu and select the
Command Line Interface (CLI) option from the Main Menu, the CLI prompt
appears at the Operator level.
Changing Parameter Settings. Regardless of which interface is used (CLI,
menu interface, or web browser interface), the most recently configured
version of a parameter setting overrides any earlier settings for that parameter.
Using the Command Line Interface (CLI)
After you enter enable, the Password
prompt appears. After you enter the
Manager password, the system prompt
appears with the # symbol:
The CLI accepts "e" as the abbreviated
form of "ethernet".
Using the CLI
4-7