Advantages of Using ProCurve Manager or ProCurve Manager Plus
Figure 5. Example of Web Browser Interface Result of the Login Banner
The default banner appears only when the switch is in the factory
default configuration. Using no banner motd deletes the currently
configured banner text and blocks display of the default banner. The
default banner is restored only if the switch is reset to its factory-
The switch supports one banner at any time. Configuring a new
banner replaces any former banner configured on the switch.
If the switch is configured with ssh version 1 or ssh version 1-or-2,
configuring the banner sets the SSH configuration to ssh version 2
and displays the following message in the CLI:
Warning: SSH version has been set to v2.
If a banner is configured, the switch does not allow configuration with
ssh version 1 or ssh version 1-or-2. Attempting to do so produces the
following error message in the CLI:
Banner has to be disabled first.
If a banner is enabled on the switch, the Web browser interface
displays the following link to the banner page:
Notice to all users
Selecting a Management Interface