HP ProCurve 2810 Series Management And Configuration Manual page 186

Port Status and Basic Configuration
Viewing Port Status and Configuring Port Parameters
10-8
Feature Show Interfaces Brief
Mode (Configured)
MDIX Mode
* There is also the show interfaces [< port-number >] option, which displays port
statistics. Refer to "Viewing Port and Trunk Group Statistics and Flow Control
Status" on page B-10.
The figures 10-3 through 10-6 list examples of the output of the above two
commands for the same port configuration on two different switches.
Figure 10-3. Example Show Interface Command Listing
Figure 10-4. Example Show Interface Config Command Listing
Show Interfaces Config
No
Operating
Current Operating Mode
Current Configured Mode
Yes
Configured