HP ProCurve 2810 Series Management And Configuration Manual page 349

ProCurve(config)# chassislocate
blink <1-1440>
off
on <1-1440>
ProCurve(config)# chassislocate
Figure B-24. The chassislocate command
�����
�����
��� ���
�������
��� ���
���� ���
�������
Locator LED
Figure B-25. Location of the Locator LED
Blink the chassis locate led (default 30 minutes).
Turn the chassis locate led off.
Turn the chassis locate led on (default 30 minutes).
Monitoring and Analyzing Switch Operation
Locating a Device
B-29