Specifying The System Manager Settings (System Manager Settings) - Canon imageRunner 6020 Reference Manual Reference Manual

Specifying the System Manager Settings
(System Manager Settings)
You can set an ID and a password for the System Manager. If the System Manager
ID/password is set, restrictions can be placed on storing or changing the System
Settings.
IMPORTANT
•
Attaching the optional Card Reader-C1 erases the System Manager ID and password
that have already been stored.
•
Depending on the login services you set, if Department ID Management is set to 'Off' and
System Manager is not specified, all of the users may be considered as Administrators
without authentication.
NOTE
•
If the optional Card Reader-C1 is attached, cards to which number 1 to 1,000 have been
assigned, cannot be used when registering the System Manager ID.
•
For instructions on how to enter characters, see "Entering Characters from the Touch
Panel Display," on p. 1-43.
•
The maximum number of characters you can assign for a name, contact, or comment is
32, and 64 for an e-mail address.
•
The maximum number of digits you can store for the System Manager ID and password
is seven. If you enter fewer than seven digits for either setting, the machine stores them
with leading zeros.
- Example: If <321> is entered, it is stored as <0000321>.
1
Press
[System Manager Settings].
If the System Manager ID and Password have already been set, enter the System
Manager ID and System Password using
(Additional Functions) © [System Settings] ©

Specifying the System Manager Settings (System Manager Settings)

©
- (numeric keys)
0 9
4
press (ID).
ID
4-3