Setting The Standard Paper For The Stack Bypass - Canon imageRunner 6020 Reference Manual Reference Manual

4
Press [Yes].
If you do not want to erase the image, press [No].
The image form is erased.
5
Press [Done] repeatedly until the Basic Features screen
appears.

Setting the Standard Paper for the Stack Bypass

You can set the paper size and type that the stack bypass uses beforehand. This
setting is useful if you always load the same paper size and type into the stack
bypass.
NOTE
•
If you are using the stack bypass as a paper source for the Copy, Mail Box, and Receive
functions, you must select the stack bypass when setting Drawer Eligibility For APS/ADS.
(See "Setting a Paper Drawer for Auto Paper Selection/Auto Drawer Switching," on p.
3-14.)
•
The default setting is 'Off'.
1
Press
Setting Specifications That Are Common to Each Function (Common Settings)
(Additional Functions) © [Common Settings].
3
3-35