Activity Report Tx/Rx - Canon imageRunner 6020 Reference Manual Reference Manual

Activity Report TX/RX

This function enables you to print a log of all Send and Receive jobs. You can select
whether to print the report after every 100 jobs (Auto Print), or at a specific time
(Daily Activity Report Time). You can print Send or Receive job logs separately. You
can also print an Activity Report manually from the System Monitor screen. (See
"Printing the Send Job Status/Log," on p. 2-19.)
NOTE
•
The default settings are as follows:
- Auto Print: 'On'
- Daily Activity Report Time: 'Off'
- Send/Receive Separate: 'Off'
•
Please note that the addresses in the above report are fictitious.
s DEPT. ID
When a Department ID is set, it is listed in a log.
A log of send jobs is printed for each ID.
s ST. TIME
Prints the date and time (24-hour notation) that the send job was started. (An asterisk (*)
indicates that you have already printed a report for that transmission.) If user
authentications of MEAP are performed, the user names are displayed below the start
time. When the machine cannot specify the users (for example, when using the auto
forwarding mode), the user names are not displayed.
Sample Reports and Lists
8
8-5