5
6
7
Replacing the Staple Cartridge in the Stapler Unit
When the Finisher runs out of staples, the staple cartridge must be replaced. A
display similar to the one shown below appears on the touch panel display. Follow
the procedure described below to replace the staple cartridge.
7-18
Finisher-F1/Saddle Finisher-F2/Puncher Unit-B1
Return Cover 2 to its original position, and close the top
cover.
CAUTION
When closing the cover, be careful not to get your fingers caught, as this
may result in personal injury.
Continue to follow the instructions on the touch panel display.
NOTE
The screen indicating how to remove the paper jam will remain displayed until the
paper jam has been cleared. (See "Screen Shown When There Is a Paper Jam," on
p. 6-2.)