Canon imageRunner 6020 Reference Manual Reference Manual page 324

8
4
9
4-100 LDAP Server Settings
IMPORTANT
If <Login Information> is set to 'Use (security auth.)' for the LDAP server and
Reverse DNS Lookup (a function that looks up the host name from the IP address)
is not supported, enter a host name and not an IP address.
NOTE
You can enter up to 48 characters for the server's address.
Press [Location to Start Search].
If the server's LDAP version is 3, then you do not have to specify [Location to
Start Search]. (If the LDAP version is 3, the machine can automatically retrieve
settings from the server, and sets the location to start searching.) If the server's
LDAP version is 2, you have to specify [Location to Start Search].
Enter the location to start searching © press [OK].