Department Id Management When Using The Card Reader-C1; Changing The Password And Impression Limit - Canon imageRunner 6020 Reference Manual Reference Manual

Department ID Management When Using
the Card Reader-C1
This section explains how to use Department ID Management, and how to check
the print totals when the control card is being used.
NOTE
The maximum number of digits you can store for a password is seven. If you store them
with less than seven digits, the machine stores them as follows:
- Example: If <321> is entered © <0000321> is stored

Changing the Password and Impression Limit

You can change the password and impression limit of the stored Department ID.
1
7
2
7-50 Card Reader-C1
(Additional Functions) © [System Settings] © [Dept.
Press
ID Management].
If a System Manager ID/Password is set, press [System Settings] © enter the
System Manager ID and System Password © press
NOTE
If the desired setting is not displayed, press [w] or [v] to scroll to the desired
setting.
Press [Store Dept. ID/Password].
(ID).
ID