Additional Functions Settings Table
The following settings can be selected or stored from the Additional Functions
screen. For details on settings not explained in this manual, see the following
guides:
•
Copy Settings ................................................................ Copying Guide
(Including the settings for remote copy prints)
•
Communications Settings, Address Book Settings ....... Sending Guide
•
Mail Box Settings........................................................... Mail Box Guide
•
Printer Settings .............................................................. PS/PCL Printer Guide
•
Network Settings ........................................................... Network Guide
Additional Functions
Common Settings
Initial Function
Auto Clear Setting
Audible Tones
Inch Entry
Drawer Eligibility For APS/
ADS
Store Paper Type
Energy Consumption in
Sleep Mode
LTRR/STMT Original
Selection
Available Settings
Select Initial Function:
Copy*/Send**/Mail Box*/MEAP**
Set [System Monitor] as the Initial Function:
On/Off*
Set [Device] as the default screen for [System Monitor]:
On*/Off
Initial Function*/Selected Function
Entry Tone/Error Tone/Job Done Tone (All On*/Off)
On*/Off
Copy/Printer/Mail Box/Receive/Other (Bypass: On/Off*,
Drawers: On*/Off)
Copy: Consider Paper Type: On/Off*
Paper drawer (1, 2), Paper Deck: Plain*/Recycled/Color/
Letterhead/Bond/3-Hole Punch**/Heavy
Paper drawer (3, 4): Plain*/Recycled/Color/Letterhead/
Bond/3-Hole Punch**/Heavy
Low*/High
Distinguish Manually/Use LTRR Format*/Use STMT
Format
Additional Functions Settings Table
3
Applicable
Page
p. 3-8
p. 3-10
p. 3-11
p. 3-13
p. 3-14
p. 3-17
p. 3-21
p. 3-22
3-3