Canon imageRunner 6020 Reference Manual Reference Manual page 261

8
Select [On] or [Off] for <Always send notice for RX errors>.
[On]: If an error occurs, the sender is always informed of the details of the error.
[Off]: If an error occurs, the sender is not informed of the details of the error.
9
Select [On] or [Off] for <Use Send Via Server> © press [OK].
[On]: Enables you to use the Send Via Server setting when specifying destination
conditions for I-fax sending.
[Off]: Does not enable you to use the Send Via Server setting when specifying
destination conditions for I-fax sending.
The selected mode is set.
10
Press [Done] repeatedly until the Basic Features screen
appears.
Specifying the Communications Settings (Communications Settings)
4
4-37