Checking Send Job Details - Canon imageRunner 6020 Reference Manual Reference Manual

Checking Send Job Details

1
2
2
2-12 Checking Job Details
Press [System Monitor] © [Send].
Press [Status] or [Log] © select the job whose details you
want to check © press [Details].
IMPORTANT
You cannot check the status of send jobs specified from MEAP applications,
because these jobs are not displayed.
NOTE
If you set Erase Failed TX to 'Off', and specify multiple destinations, the job status
screen of the specified destinations that were completed without errors indicates
<Finished.>. Also in this case, if you select any of these destinations and cancel
their jobs, their job details are indicated on the job log screen.