Canon imageRunner 6020 Reference Manual Reference Manual page 325

Enter the location to start searching according to the type of LDAP server you are
using, or as described below.
•
If you are using Windows 2000 Server with Active Directory:
Add "DC=" to each dot-separated series of characters in the Active Directory
domain name, and separate each series of characters by a comma.
Example: If <team1.salesdept.canon.co.jp> is the domain name in Active
Directory:
DC=team1, DC=salesdept, DC=canon, DC=co, DC=jp
•
If you are using Novell NetWare 5.1 (NDS) or later:
Add the corresponding object class "o=", "ou=", or "c=" to each dot-separated
series of characters that configure the distinguished name, and separate each
series of characters by a comma.
Example: If <TEAM1.SALESDEPT.CANON> is the distinguished name in NDS:
ou=team1, ou=salesdept, o=canon
•
If you are using Lotus Notes Domino R5 or later:
Enter the dn (Distinguished Name) of the node on the directory tree, such as
"ou=team1", "ou=salesdept", "o=canon", or "c=jp".
You can also use
0
your entries.
NOTE
You can enter up to 128 characters for the location to start searching.
10
Select [On] or [Off] for Use SSL (Secure Socket Layer).
[On]: SSL is used. Since using SSL enables the user to encode the content of the
communication, communication can be performed with greater security.
[Off]: SSL is not used.
- (numeric keys) to enter numbers, and
9
(Clear) to clear
C
LDAP Server Settings 4-101
4