s MODE
Prints the communication type and method.
Communication type: TX
*If there is a Forwarding Job No., it is printed on the second line.
Communication method: FTP/SMB/IPX/BOX/I-FAX/MAIL
s PGS.
Prints the number of pages of the original that were sent normally to the remote party.
TX Report/TX Error Report
A Send Result Report can be printed when a send job is complete. A Send Result
Report can also be printed along with a portion of the sent document. By default,
the report is printed when an error occurs. However you can also specify it be
printed after every send job or not printed at all. (See "Send Result Report (TX
Report)," on p. 3-68.)
NOTE
•
The default settings are as follows:
- Send Result Report: 'For Error Only'
- Error Copy Print: 'On'
•
Please note that the addresses in the above report are fictitious.
s JOB NO.
Prints a four digit number, which is automatically assigned when the sending document is
accepted.
s DEPT. ID
When a Department ID is set, it is listed in a log.
Sample Reports and Lists
8
8-3