Specifying The System Manager Settings - Canon imageCLASS MF7280 Reference Manual

Specifying the System Manager Settings

You can set an ID and a password for the System Manager. Once the System
Manager ID/password is set, restrictions can be placed on storing or changing the
System Settings.
IMPORTANT
•
If User ID Management is set to on, Department ID Management is set to 'Off' and
System Manager ID or Password is not specified, all of the users may be considered as
the Administrator even without authentication.
•
When User ID Management is set to 'On', users whose user type is registered as "User"
(end users) cannot change the System Manager Settings even if there are no System
Manager ID and System Password set.
5
•
If User ID Management is set to 'On', users whose user type is registered as
"Administrator" can change the System Manager Settings by entering the System
Manager ID and System Password, or registering the System Manager ID and System
Password as their user information in advance.
NOTE
•
For instructions on entering characters, see "Entering Characters from the Touch Panel
Display," on p. 2-16.
•
You can enter a maximum of 32 characters for a name.
•
The maximum number of digits that you can store for the System Manager ID and
System Password is seven. If you enter fewer than seven digits for either setting, the
machine stores them with leading zeros.
- Example: If <321> is entered, <0000321> is stored.
5-2

Specifying the System Manager Settings