s Avoid exposing the machine to rapid changes in temperature.
If the room in which the machine is installed is rapidly heated from a low temperature,
condensation may form inside the machine. This can adversely affect print quality or result
in an inability to obtain print images.
s Avoid installing the machine near computers or other precision electronic
equipment.
Electrical interference and vibrations generated by the machine during printing can
adversely affect the operation of such equipment.
s Avoid installing the machine near televisions, radios, or other similar
electronic equipment.
The machine might interfere with sound and picture signal reception. Insert the power
plug into a dedicated power outlet, and maintain as much space as possible between the
machine and other electronic equipment.
s Do not remove the machine's leveling feet.
Do not remove the machine's leveling feet after the machine has been installed.
If you put weight on the front of the machine while the paper drawers or units within the
machine are pulled out, the machine may fall forward. To prevent this from happening,
make sure that the machine's leveling feet are in place.
Installation Location and Handling
1
1-5